OSHA Approved Shoes: ASTM F2413 Safety Shoe Ratings Explained
People search for "OSHA approved shoes", but OSHA doesn't approve brands or models. OSHA requires employers to provide protective footwear where there are foot hazards, and that footwear must meet the ASTM F2413 standard. This guide, one of our safety footwear guides, explains OSHA requirements for safety shoes and how to read the ASTM label.
When you're ready to buy, every one of our ASTM-rated safety shoes lists its ratings on the product page.
OSHA
OSHA Requirements for Safety Shoes
Under OSHA 29 CFR 1910.136, employers must make sure workers wear protective footwear when they face a danger of foot injuries from falling or rolling objects, objects piercing the sole, or electrical hazards. The footwear must meet ASTM F2413 (or an equivalent standard).
In practice that means a hazard assessment for each job, then safety shoes whose ASTM F2413 label covers those hazards. The old ANSI Z41 standard was replaced by ASTM F2413 in 2005, so 'ANSI approved' safety shoes are now rated under ASTM.
ASTM F2413
How to Read an ASTM F2413 Safety Shoe Label
The label inside the tongue has up to three lines. Line 1 names the standard and its edition year, such as ASTM F2413-18. Line 2 shows the gender (M or F) and the toe ratings. Line 3 lists any other protection.
- I/75Impact: the toe withstands 75 foot-pounds.
- C/75Compression: the toe withstands 2,500 pounds.
- Mt/75Metatarsal guard protects the top of the foot.
- EHElectrical hazard: the sole insulates against accidental contact with live circuits in dry conditions.
- PRPuncture resistant plate in the sole.
- SD / CdStatic dissipative or conductive, for electronics and explosive environments.
Questions
Safety Shoe Standard Questions
The old ANSI Z41 standard was replaced in 2005 by ASTM F2412 (test methods) and ASTM F2413 (performance requirements). Today ASTM F2413 is the U.S. safety shoe standard that OSHA references.
When a hazard assessment finds a risk of foot injury from falling or rolling objects, objects piercing the sole, or electrical hazards. Construction, warehouses, manufacturing, utilities and many service jobs fall into that group.
Shoes are tested to the edition in force when they were made, shown by the year on the label (for example F2413-11 or F2413-18). What matters is that the ratings on the label match your job hazards and the shoes are in good condition.