Choose steel toe if...
You want the lowest price and the slimmest toe, you work in construction, manufacturing or heavy industry, and you don't pass through metal detectors.
Shop steel toe shoes →Our shoemobile brings ASTM-compliant footwear on-site with digital fit tracking and reorder workflows.
Schedule a Visit →Our shoemobile brings ASTM-compliant footwear on-site with digital fit tracking and reorder workflows.
Schedule a Visit →Our shoemobile brings ASTM-compliant footwear on-site with digital fit tracking and reorder workflows.
Schedule a Visit →Our shoemobile brings ASTM-compliant footwear on-site with digital fit tracking and reorder workflows.
Schedule a Visit →Our shoemobile brings ASTM-compliant footwear on-site with digital fit tracking and reorder workflows.
Schedule a Visit →Our shoemobile brings ASTM-compliant footwear on-site with digital fit tracking and reorder workflows.
Schedule a Visit →Composite toe vs steel toe is the most common question we hear at the fitting bench. The short answer: both protect your toes to the same ASTM F2413 standard (I/75 C/75), so the choice comes down to weight, toe room, price and where you work. This guide is part of our safety footwear guides.
Below, we compare composite safety shoes vs steel toe styles point by point, then show you where to shop each one.
Side by Side
A steel toe cap is thin, strong and inexpensive. A composite cap is made of carbon fiber, fiberglass or Kevlar: it contains no metal and weighs less, but it needs to be a little thicker to pass the same test.
Alloy toes (aluminum or titanium) sit in between: lighter than steel and thinner than composite, but still metal.
Which to Choose
You want the lowest price and the slimmest toe, you work in construction, manufacturing or heavy industry, and you don't pass through metal detectors.
Shop steel toe shoes →You walk a lot and want a lighter shoe, you work at airports, courthouses or secure plants, or you work in cold storage or hot sun where steel would carry the temperature.
Shop composite toe shoes →Questions
Yes, for the hazards the standard covers. A composite toe labeled ASTM F2413 I/75 C/75 passed the same 75 foot-pound impact and 2,500-pound compression tests as a steel toe with the same label.
Many electricians prefer them because the cap is non-metallic. Electrical hazard (EH) protection comes from the sole and construction, though, not the cap, so look for EH on the label whichever toe you choose.
Yes. After a heavy impact or compression, replace the shoes even if the cap looks fine: steel can dent and composite can crack inside, and either may not protect you a second time.